please note - with minor modification, harness part no. 912268 can be used on the dj-3a/cj-6/fc-150/fc-170 and late model pickups and station wagons with the large instrument cluster.
This is the M38A1 Wiring Harness Kit. The kit comes with a partial diagram that if used in conjunction with the diagrams from the original vehicle manuals will give you all of the information that you need for installation. Each component in this kit is metal (Douglas) shelled and each piece is metal number tagged.
At Vintage Wiring, each vehicle auto wiring harness is reproduced using patterns made from an original harness. Every effort is made to maintain correctness and originality. Correct gauge wire with proper color code and tracers are used, including the use of cotton covered wire. All terminal ends are crimped and soldered.
Then, I started looking at the little metal ID number tags on each wire and the turn signal harness while reading the instructions. I forgot that I ordered the new vehicle wiring harness ALREADY wired for turn signals! All I had to do was disconnect the light switch and connect the turn signal harness between it and the vehicle wiring harness.
I had a customer who bought a harness from the above vendor for a M38A1, the rear lights would not work, the vendor admitted they made some with incorrect wiring. Unlike other harnesses the A1 is all one piece from instruments to the back, it would involve a lot of work to remove it and send it back.
M38a1 Wiring Harnes. By Anya Zhuravlyova On September 27, 2019 In Wiring Diagram 186 views