numbers in the table below indicate which column to use in each parts list for each individual code number 7-22-82 shield-arc ® sa-200-f162 & f163 model index
Wiring a new plug isn't difficult, but it's important to get the hot and neutral wires connected to the proper prongs. The danger isn't fire. The worry is that a miswired plug poses a fairly serious shock hazard. The key is to make sure you connect the wires to the proper terminals in the plug
Hello to everyone, I'm new to this site and the sa200 in general. Sitting in my shop is a 1979 sa200. With the switch turned to local it will instantly go to high idle and weld. Once it is switched to remote it will not go to high idle. And if I drag the rod across a piece of steel it only sparkles.
Welcome to High Speed Engineering! We design and make many of our own parts for the Sa-200 and have full access through Lincoln for any parts you might need. Please ask if you do not see what you need in the store. If I don't have it, I can point you in the right direction.
sa 200 remote wiring. hello anybody have a sa 200 wired for a remote if so does it use the original power outlet or does it have the cord hanging from behind the machine I wired another machine for a remote and just added a spdt switch and use the original outlet to plug my remote in seen a lot
Product Names and Code Numbers can be found on the name plate of welders and wirefeeders. In order to ensure you have the correct Operator's Manual for your machine you must use a Code Number Search.